Clean Clay

Product Name: Clean Clay
Intended Use: Clay for removing iron powder and paint mist
Volume: 200g
pH: Neutral
Manufacturer: SENSHA
Country of Manufacturer: Japan
Contents in the box:

  • 1 x Clean Clay 200 g (for approximately 10 - 20 cars) 
  • Full-Colour Picture Instruction Manual
Out of stock
Clean Clay

Remove paint mists and iron powders at once

Clean Clay is the professional use and the must item to remove paint mists and irons for the surface preparation. An significant amount of Iron powders which cannot be removed by iron removers and/or unwanted paint mists from construction areas can be cleaned up with one time application by the product.

SENSHA obtained lots of many requests from our customers in regards to paint mists and irons removal issues. Therefore, Clean Clay was developed. Once you try this, you will be understood how Clean Clay is totally different from other products.

Example of paint mists

Paint mists are on a paint surface. If looking at them closer, they are more noticeable:

The clay excels in all conditions

An application is quite simple; after washing a car, rub surfaces affected with paint mists and/or irons by Clean Clay while pouring water. It makes the surfaces silky smooth.

We used to prepare different types of clay depending upon car colours and conditions. However we have developed the new, Clean Clay, hence you can use the one kind for all colours and conditions.


Clean Clay is a clay based product and may cause small scratches. They can be removed by Scratch Cut. For new cars or cars with good surface conditions, it is recommended to utilize Iron Cut to dissolve irons instead. If iron powders cannot be removed by multiple applications of Iron Cut, then please try Clean Clay.


Write Your Own Review
You're reviewing:Clean Clay